Panasonic ziaino F-JPW50H Operating Instructions Manual Download Page 21

Page: 21 / 32

●

Wash it with water

Tank

The removal method of front panel

The removal method of HEPA composite filter

The installation method of front panel

The installation method of HEPA composite filter

The removal

installation methods of front panel

HEPA composite filter

Pull front panel forward with both hands.

Pull it forward

with both hands

Pull it forward

with both hands

HEPA composite filter

Front panel

Push it in until it

clicks into place

Align the HEPA composite filter with the

dent of the main unit and place it into the

main unit.

Push the lower part

of the front panel into

the main unit.

Hang the upper hook of the

front panel on the main unit.

Filter hook

turn down

Concave part of the product

(turn up)

Toggle the filter hook upward, and remove

HEPA composite filter.

Toggle the filter hook downward to secure

the HEPA composite filter.

Wipe off any dust and dirt using a well

wrung-out soft cloth

Front panel and Body

< about once a month >

Do not wipe it with a hard cloth or hardly.

Otherwise, the surface may be damaged.
Wipe the power plug with a dry cloth.

Remove the dirt with a vacuum cleaner, etc.

Nozzle

When the main unit becomes dirty during normal

use, clean the main unit with a wrung wet cloth.

Air inlet

(left and right)

MAINTENANCE

Summary of Contents for ziaino F-JPW50H

































Search results

Summary of Contents for ziaino F-JPW50H

Reviews:

Related manuals for ziaino F-JPW50H

Brands by name

Popular brands

Panasonic ziaino F-JPW50H, Operating Instructions Manual

Search results

Summary of Contents for ziaino F-JPW50H

Reviews:

Related manuals for ziaino F-JPW50H

Brands by name

Popular brands