13
Lo
Hi
1
●
·
●
2
●
Louver
When the product is operating, do not adjust the louver manually.
(Otherwise, it can not operate according to the set angle.)
If you adjusted them manually, please stop the product.
(The product can reset to the normal state when starts again.)
Notice
Start to operate.
Select air
volume mode
Select Turbo
mode
The product enters preparatory operation in about
20 seconds after the button is pressed.
After the preparatory operation is completed, the product
starts to operate.
The product does not blow out air during preparatory
operation.
(The status indicator lights on)
When used for the first time, the product operates with “Air
Volume” set to “Lo” and “Electrolytic Strength” to “Medium”.
From the next time, the product will start with the settings
when it stops operation last time.
(The status indicator blinks in blue.)
Press this button to
switch the air volume
level by level.
In “Turbo” mode, the electrolytic strength is “High” and
the product runs at its maximum air volume.
It can be set during preparatory operation.
(The indicator lights on)
(The indicator lights on)
3
4
●
Stop operating.
The product continues to blow air for about 10 seconds
after the button is pressed.
(The purpose is to drain the hypochlorous acid
accumulated in the main unit.)
OPERATION
OPERATION
