Panasonic YC-400TX4, Operating Instructions Manual

Page: 12 / 40

6
4 Front panel
1.Power switch
The breaker controls the input of the power supply.
2.Right cycle button
Press this button to directly enter the parameters setting status of the last quit when the machine is in standby.
Continue to press this button, the LED indicator will switch to the right in turn. When switching to the rightmost
indicator, press the button again and the leftmost indicator will be on, then continue to cycle to the right. The
successively circulating indicators are represented as: Pre-Flow—Initial Current—Up slop (Arc Force)—Pulse
Current—Pulse Width—Welding Current—Pulse Frequency—Down slop(Spot Time)—Crater Current—Post Flow--
Pre-Flow.
3.Display Board
To display the output voltage when weld; to display parameters when set the parameters.
4.Display Board
To display the pre-set current when machine is standby; to display the output current when weld; to display channel
codes when set the parameters.
1
2 3
4
8
6 7 9
10
11
5
12
13