56
@1 @2
Backward/Forward Sequence button
(SEQ BACK/FWD)
BACK:
In combination with the numeric buttons, runs a
Tour or Group sequence backward on the selected
monitor.
It is also used to continue a sequence backward,
that was previously paused on that monitor by
pressing the PAUSE button.
FWD:
In combination with the numeric buttons, runs a
Tour or Group sequence forward on the selected
monitor.
It is also used to continue a sequence forward, that
was previously paused on that monitor by pressing
the PAUSE button.
@3
All Alarms Reset button (ALL RESET)
Cancels all active alarms at a time.
To reset all alarms, first select the alarmed monitor
(Monitor 1 for Alarm Mode 1, any of four monitors for
Alarm Mode 2), and then press this button.
Note:
To cancel all alarms without first selecting the
monitor, press this button in combination with the
ALT button.
@4 @5
Decrement/Increment button
(–1CAM DEC, +1CAM INC)
–1CAM DEC:
Moves a sequence one step backward
from the step that was previously paused on the
selected monitor by pressing the PAUSE button.
Also, when the selected monitor is in the spot
mode, pressing this button will replace the currently
selected camera with the next lower number cam-
era.
+1CAM INC:
Moves a sequence one step forward from
the step that was previously paused on a monitor
by pressing the PAUSE button.
Also, when the selected monitor is in the spot
mode, pressing this button will replace the currently
selected camera with the next higher number cam-
era.
@6
Alarm Recall button (RECALL)
Recalls the Alarm Log (record of activated alarms).
Select the desired monitor to display the alarm records,
then press this button to toggle the display of alarm
records On and Off on the selected monitor.
@7 @8
Backward/Forward History button
(HISTORY BACK/FWD)
BACK:
Displays the previous camera picture on the
selected monitor. Each operation of this button
backs up the camera picture by one.
In the SETUP MENU, selects the previous page or
step of the setup tables.
FWD:
Moves the camera picture forward on the select-
ed monitor after the HISTORY BACK button has
been used.
In the SETUP MENU, selects the next page or step
of the setup tables.
@9
Status button (STATUS)
Toggles the display of the Camera Site Status Table on
the selected monitor On and Off.
Note:
To toggle the display of the System Status Table
on the selected monitor On and Off, press this but-
ton in combination with the ALT button.
#0
Camera Menu button (CAM MENU)
In combination with the ALT button, toggles the display
of the selected Camera’s Setup Menu On and Off.
The indicator lights up when the camera setup mode is
selected.
#1
Set Up button (SET UP)
In combination with the ALT button, toggles the display
of the SETUP MENU of the Matrix Switcher On and Off.
The indicator lights up when the setup mode is select-
ed.
