Panasonic WV-SW175, Operating Instructions Manual

Page: 97 / 244

Note
•
When “Pan-Tilt degree/Zoom ratio display” is selected, the Pan-Tilt degree/Zoom ratio display is
displayed in the position specified in “OSD position” on the [Basic] tab. (
®
page 55)
•
When “Direction display” is selected, the direction display is displayed in the position specified in “OSD
position” on the [Basic] tab. (
®
page 55)
[Tilt Angle]
SW396 SW396 SW395 SW395 SC386 SC386 SC385 SC385 SC384 SC384
Select the maximum degree for tilting from the following. (Level = 0°)
•
SW395 SW395 SC385 SC385 SC384 SC384
10°/ 5°/ 3°/ 0°/ –3°/ –5°/ –10°/ –15°/ –20°/ –25°/ –30°
•
SW396 SW396 SC386 SC386
10°/ 5°/ 3°/ 0°/ –3°/ –5°/ –10°/ –15°
Default: 0°
Note
SC385 SC385 SC384 SC384
:
•
When using an inner cover (WV-Q157 or an accessory of optional mount bracket), upper side of images
will be hidden (become black) when the tilt angle of the camera is almost level. (When “–5°” is selected
for “Tilt Angle” on the setup menu, upper half of images will be hidden.) In this case, images will also
be washed out depending on the object when “On” is selected for “AGC” on the setup menu
(
®
page 103).
SW395 SW395
:
•
If “–20°”, “–25°” or “–30°” is selected, the area hidden by the camera housing may increase when the
tilt angle of the camera is almost level.
SW396 SW396 SC386 SC386
:
•
If “–10°” or “–15°” is selected, auto mode stops. To restart auto mode, start auto mode again.
•
If “–10°” or “–15°” is selected, when the camera reaches the tilting angle of 90°, the camera pans or
tilts at high speed to the reverse direction. In this way, it is possible to control the camera while
displaying images in proper orientation (Pan/tilt-flip function).
[Pan/tilt-flip]
SW395 SW395 SC385 SC385 SC384 SC384
Select the pan/tilt-flip setting from the following.
•
On: When the camera reaches the panning or tilting end during manual operation, the camera pans or tilts
at high speed to the reverse direction. In this way, it is possible to control the camera without having to
stop panning/tilting and displaying images in proper orientation.
•
Off: Pan/tilt-flip does not work.
•
Default: On
Note
•
When the zoom ratio is adjusted to the “Tele” side, images will be partially hidden even if the pan/
tilt-flip function is activated.
Operating Instructions 97
11 Configure the settings relating to images and audio [Image/Audio]