Panasonic WV-SW175, Operating Instructions Manual

Page: 84 / 244

[Video encoding format]
SW396 SW396 SW395 SW395 SC386 SC386 SC385 SC385 SC384 SC384
Select “H.264” for the video encoding format.
•
H.264: H.264 will be set for the video encoding format. The subsequent setting items will be for H.264. The
tab name will be changed to [JPEG/H.264].
•
MPEG-4: MPEG-4 will be set for the video encoding format. The subsequent setting items will be for
MPEG-4. (
®
page 88)
The tab name will be changed to [JPEG/MPEG-4].
•
Default: H.264
H.264(1)/H.264(2)
[H.264 transmission]
Select “On” or “Off” to determine whether or not to transmit H.264 images.
•
On: Transmits H.264 images.
•
Off: Does not transmit H.264 images.
•
Default: On
Note
•
When “On” is selected for “H.264 transmission” in “H.264(1)” or “H.264(2)”, displaying of H.264 images
or JPEG images on the “Live” page will become available.
•
When “On” is selected for “H.264 transmission” in “H.264(1)” and “H.264(2)”, H.264 images are
viewable using other devices with each setting.
•
When “On” is selected for “H.264 transmission” in “H.264(1)” or “H.264(2)”, the transmission interval
of JPEG images may sometimes become longer.
SW396 SW396 SW395 SW395 SC386 SC386 SC385 SC385 SC384 SC384 SW175 SW175 SW172 SW172 ST165 ST165 ST162 ST162
:
•
When “H.264” is selected for “Recording format”, it is impossible to transmit H.264 images with the
settings for “H.264(2)”. In this case, the settings for “H.264(2)” are invalidated.
[Internet mode (over HTTP)]
Select “On” when transmitting H.264 images via the Internet. It is possible to transmit H.264 images without
changing the broadband router settings configured for JPEG image transmission.
•
On: H.264 images and audio will be transmitted using the HTTP port. Refer to page 169 for further
information about the HTTP port number settings.
•
Off: H.264 images and audio will be transmitted using the UDP port.
•
Default: Off
Note
•
When “On” is selected, only “Unicast port (AUTO)” will be available for “Transmission type”.
•
When “On” is selected, it may take time to start displaying H.264 images.
•
When “On” is selected, H.264 images may not be displayed depending on the number of the concurrent
access user and audio data availability, etc.
•
When “On” is selected, only IPv4 access is available.
[Image capture size]
Select the image capture size from the following.
When “4:3” is selected for “Aspect ratio”
SC384 SC384 SW175 SW175 SW174W SW174W ST165 ST165
:
–
H.264(1): QVGA/ VGA/ 1280x960
–
H.264(2): QVGA/ VGA
SW172 SW172 ST162 ST162
:
–
H.264(1): QVGA/ VGA/ 800x600
–
H.264(2): QVGA/ VGA
84 Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]