The description below is the configuration of the priority stream that can transmit images without deteriorating
the image quality and refresh interval even when multiple users access concurrently.
Priority stream
[Activation]
Select “On” or “Off” to determine whether or not to use the priority stream.
•
Default:
Off
Note
•
When “On” is selected for “Activation” of “Priority stream”, number of users who can access the camera
may be limited.
[Destination IP address(1)]
Enter the first destination IP address.
[Destination IP address(2)]
Enter the second destination IP address.
[Stream type]
Select “JPEG(1)”, “JPEG(2)”, “JPEG(3)”, “H.264(1)”, “H.264(2)”, “H.264(3)”, or “H.264(4)”.
•
JPEG(1):
JPEG(1) images will be transmitted.
•
JPEG(2):
JPEG(2) images will be transmitted.
•
JPEG(3):
JPEG(3) images will be transmitted.
•
H.264(1):
H.264(1) images will be transmitted.
•
H.264(2):
H.264(2) images will be transmitted.
•
H.264(3):
H.264(3) images will be transmitted.
•
H.264(4):
H.264(4) images will be transmitted.
•
Default:
JPEG(1)
Note
•
When “Best effort” is selected for “Transmission priority” of “H.264”, bit rate will vary between the
maximum and minimum rates while images are being transmitted.
[Refresh interval*]
Select the refresh interval from the following.
This setting is validated only when “JPEG(1)”, “JPEG(2)”, or “JPEG(3)” is selected for “Stream type”.
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps/ 2fps/ 3fps/ 5fps/ 6fps*/ 10fps*/ 12fps*/ 15fps*/ 30fps*
•
Default:
1fps
Operating Instructions
137
15 Configure the settings relating to the authentication [User mng.]
Summary of Contents for WV-SFN310
Page 209: ...Operating Instructions 209 Notes ...
