Panasonic WV-SFN310 Operating Instructions Manual Download Page 38

Page: 38 / 210

•

The audio data is not played back during the fast playback.

[5s backward] button

Each time this button is clicked, the recorded data goes back by 5 seconds and starts playing.

[5s forward] button

Each time this button is clicked, the recorded data goes forward by 5 seconds and starts playing.

[STOP] button

Playback will stop and the “Playback” window will turn to the “Live” page.

[Time]

Time and date when each log has been recorded will be displayed.

[Duration]

Displays the period of time that the data has been recorded on the SD memory card.

[Event]

The event type will be displayed.

•

MN/SC:

Log by “Manual/Schedule”

•

TRM1:

Alarm by alarm input to Terminal 1

•

TRM2:

Alarm by alarm input to Terminal 2

•

TRM3:

Alarm by alarm input to Terminal 3

•

VMD:

Alarm by VMD alarm

•

COM:

Alarm by command alarm

•

AUD:

Alarm by audio detection alarm

Browse

[Start] button

The selected image will be downloaded onto the PC.
Before downloading images, designate the destination directory in advance. (

page 71)

The message window will be displayed to ask if it is OK to start download when the [Start] button is clicked.
Click the [OK] button.

Note

•

When the [Cancel] button is clicked in the process of the download, the download will be canceled. In
this case, video data already downloaded before clicking the [Cancel] button will be saved on the PC.

•

Video data are saved in the files of approx. 20 MB. When the file size of video data is more than 20
MB, two or more files will be downloaded.

•

It is possible to play back video data saved on the PC using such applications as QuickTime Player or
Windows Media

Player

. However, we are not liable for performance relating to these applications.

•

Depending on the status of the SD memory card, QuickTime Player, or Windows Media Player, video
data cannot be played back.

•

In the process of the download, the operation buttons on the “Playback” page are invalidated.

The supported operating systems are Windows 8.1, Windows 8 and Windows 7 only.

Operating Instructions

7 Playback of images on the SD memory card

Summary of Contents for WV-SFN310



















































































































































































































Search results

Summary of Contents for WV-SFN310

Reviews:

Related manuals for WV-SFN310

Brands by name

Popular brands

Panasonic WV-SFN310, Operating Instructions Manual

Search results

Summary of Contents for WV-SFN310

Reviews:

Related manuals for WV-SFN310

Brands by name

Popular brands