IMPORTANT
•
It may take some time to create a backup file when backing up the setting data or a log.
•
A communication timeout may generate when the backup operation takes 10 minutes or longer. The
backup data may not be acquired completely at this time, so complete it within 10 minutes. Also, if the
correct data was acquired can be confirmed by restoring the acquired data. (Excluding the log data)
Restore
•
[Setup data]
Press the [Browse...] button and select the setup data files to restore.
Click the radio button respective to the desired option to determine whether or not to also restore network
related setting contents.
Click the [Execute] button to start restoring. Do not perform operations until the restoration is complete.
(The camera will be rebooted when the restoration is complete.)
Make sure to set the file name of setup data files used when restoring to “model name.dat”. (The model
name must be written in lower case letters and “WV-” is not needed.)
•
[Scene file]
Press the [Browse...] button and select the scene files to restore.
Click the [Execute] button to start restoring. Do not perform operations until the restoration is complete.
Make sure to set the file name of scene file data used when restoring to “model name.txt”. (The model
name must be written in lower case letters and “WV-” is not needed.)
188
Operating Instructions
18 Maintenance of the camera [Maintenance]
Summary of Contents for WV-SFN310
Page 209: ...Operating Instructions 209 Notes ...
