How to assemble the cable with the
accessory connector
Strip back the cable jacket approx. 3 mm (0.1
inch) and separate the individual conductors.
Recommended wire gauge sizes for 24V AC line.
#24
(0.22mm
2
)
Copper wire size
(AWG)
Length
of Cable
(Approx.)
(m)
(ft)
#22
(0.33mm
2
)
#20
(0.52mm
2
)
#18
(0.83mm
2
)
20
30
45
75
65
100
160
260
Accessory Connector Information
Pin No.
Power Source
1
2
3
4
24 V AC LIVE
24 V AC NEUTRAL
Ground
Not use
Contact
Up
Wire
Prepare the individual conductors for clamping.
Use MOLEX band tool part number 57027-5000
(for UL-Style Cable UL1015) or 57026-5000 (for
UL-Style UL1007) for clamping the contacts.
After clamping the contacts, push them into the
proper holes in the accessory connector of this
camera until they snap in place.
• Shrinking the cable-entry seal is a one-
time procedure. Do not shrink the cable-
entry seal until it has been ascertained
that the unit is functioning.
• CONNECT THIS TO 24V AC CLASS 2
POWER SUPPLY ONLY.
Contact
Insert
Up
A
Approx.
3 mm (0.1 inch)
Insert the wire until A position
and clamp the contacts.
Wire
Up
Wire
Contact
1
3
2
4
• 24 V AC Power supply connection
CAUTIONS
Note:
When powered up, the unit performs a self-check (including one panning, tilting, zooming and
focusing operation).
✻
The coaxial cable length (RG-6/U, 5C-2V) for the connection is up to
1 200 meters (4 000 ft.)
To Video IN
(CAMERA IN)
Video Output
24 V AC (WV-CS854)
BNC Plug
Coaxial Cable
RS485 cable
Data Port
CONNECTIONS
BNC Plug
Alarm In
Alarm Out
To Sensors
To Indicators
• The following connections should be made by qualified service personnel or system installers in
accordance with all local codes.
• See the reverse side of the cover page for mains lead connection.
Precautions
24 V AC Cable
220 - 240 V AC (WV-CS850)
51
Intelligent Security & Fire
