manualshive.com logo in svg

Panasonic WV-CS850, Operating Instructions Manual

Share
Download
Panasonic WV-CS850 Operating Instructions Manual Download Page 25

25

    ** SPECIAL1 **
PRIVACY ZONE   ON (DIS)
PROPO. P/T     OFF
AREA TITLE     ON (NESW)
PATROL         PLAY
ALARM IN/OUT
PASSWORD LOCK  ON
CLEANING       OFF
EL-ZOOM        ON
PRESET ALM     OFF

RET

Special 1 menu

●

Area Title (AREA TITLE)

Up to 8 area titles can be added in specific positions.

1. Select ON (NESW), ON (USER) or OFF by moving the joystick to

the left or right.

ON (NESW):

An area title is displayed indicating the camera

direction: North (N), North-East (NE), East (E), South-East
(SE), South (S), South-West (SW), West (W) and North-West
(NW).

ON (USER):

A user customized area title is displayed with a maxi-

mum of 16 characters.

OFF:

Area tittle is not displayed.

Default : ON (USER)

2. Press the CAM (SET) key. A submenu appears except when OFF

is selected.

Settings for ON (NESW)

1. Move the cursor to PUSH SET on the PAN/TILT, then press the

CAM (SET) key. PAN/TILT is highlighted and “U TILT D/L PAN R”
appears.

2. Move the joystick to turn the camera north, then press the CAM

(SET) key. The origin of the direction (North) is set.

Note:

Area titles appear in reverse video until the origin is set.

3. Move the cursor to PUSH SET on the ZOOM/FOCUS line, then

press the CAM (SET) key. ZOOM/FOCUS is highlighted and “U
ZOOM D/L FOCUS R” appears.

4. Move the joystick to adjust the zoom or focus.

5. Move the cursor to POSI 

, then press the CAM (SET) key. The

display position of the area title appears on the monitor. If need-
ed, change the display position by moving the joystick, then press
the MON (ESC) key.

6. Move the cursor to RET, then press the CAM (SET) key. SPECIAL

1 menu reappears.

  ** DIRECTION (NESW) **  
PAN/TILT       

→

PUSH SET 

ZOOM/FOCUS     

→

PUSH SET

POSI 
       
     
 
           + 
           N 
  

RET   DEL

AREA TITLE (NESW) setting menu

 ** DIRECTION (NESW) **  
PAN/TILT      

→

PUSH SET 

ZOOM/FOCUS    

→

PUSH SET

POSI 
    U ZOOM D/L FOCUS R      
     
 
             
             
  

RET   DEL

ZOOM/FOCUS setting menu

     

FLOOR 1
N

Display Position setting menu

 ** DIRECTION (NESW) **  
PAN/TILT      

→

PUSH SET 

ZOOM/FOCUS    

→

PUSH SET

POSI 
    U TITL D/L PAN R      
     
 
           + 
           N 
  

RET   DEL

PAN/TILT setting menu

Intelligent Security & Fire

Summary of Contents for WV-CS850


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands