manualshive.com logo in svg

Panasonic WV-CS850, Operating Instructions Manual

Share
Download
Panasonic WV-CS850 Operating Instructions Manual Download Page 31

31

●

Electric Zoom ON/OFF (EL-ZOOM ON/OFF)

The electric zoom magnifies a scene tenfold. With a twenty-twofold
optical zoom lens, the camera is capable of 220-fold zoom.

1. Move the cursor to EL-ZOOM and select ON or OFF by moving

the joystick to the left or right, then press the CAM (SET) key.

ON:

Tenfold electric zoom is available with the ZOOM switch on

the controller.

OFF:

Electric zoom is inactivated.

Notes:

• Picture quality of a scene magnified by EL-ZOOM may be

inferior to that of a non-magnified one.

• EL-ZOOM function does not work with the preset position set-

tings.

●

Preset Alarm ON/OFF (PRESET ALARM ON/OFF)

An alarm output is sent when the camera moves to the designated
position respective to the mode.

1. Move the cursor to PRESET ALARM and select ON or OFF.

ON:

Alarm signals are sent out in the following cases.

• Position move is completed in AUTO SEQ mode.
• Position move is completed in AUTO SORT mode.
• Position move to the HOME position is completed in SELF

RETURN mode.

• Position move is completed for a position request command.
• Move to the designated position is completed for ALARM

IN/OUT.

• Move to the start position is completed for AUTO PAN.
• Move to the start position is completed for PATROL PLAY.

OFF:

Alarm signals are not output.

    ** SPECIAL1 **
PRIVACY ZONE   ON (ENB)
PROPO. P/T     OFF
AREA TITLE     ON (NESW)
PATROL         PLAY
ALARM IN/OUT
PASSWORD LOCK  OFF
CLEANING       OFF
EL-ZOOM        ON
PRESET ALM     OFF
RET

Special 1 menu

    ** SPECIAL1 **
PRIVACY ZONE   ON (ENB)
PROPO. P/T     OFF
AREA TITLE     ON (NESW)
PATROL         PLAY
ALARM IN/OUT
PASSWORD LOCK  OFF
CLEANING       OFF
EL-ZOOM        ON
PRESET ALM     ON

RET

Special 1 menu

Intelligent Security & Fire

Summary of Contents for WV-CS850


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands