22
6. To set endless turn ON/OFF
Move the cursor to ENDLESS, and move the joystick to the left or
right to set endless turn ON or OFF.
ON:
The camera pans from the start position to the end position,
then keeps rotating in the same direction to return to the start
position. Set pan limit to OFF before endless turn is set to ON.
OFF:
The camera pans from the start position to the end position,
then rotates backward to the start position.
This movement is repeated over and over.
7. To set a dwell time
Move the cursor to DWELL TIME and select a dwell time by mov-
ing the joystick to the left or right. Dwell time changes as follows:
■
DIGITAL FLIP ON/OFF
• Move the cursor to DIGITAL FLIP and select ON or OFF by mov-
ing the joystick to the left or right.
OFF:
Tilt range is limited from 0° to 90°.
ON:
Tilt angle widens up to 180° with the digital flip that reverses
horizontal and vertical scanning when the camera is tilted
through the 135° point (Downright position if the camera is
installed on a ceiling).
Note:
Tilt range narrows from 180° to 90° if PAN LIMIT is set to
ON.
** AUTO PAN **
POSITION SET
SPEED
PAN LIMIT
ENDLESS
STOP TIME
RET
START
END
••••|••••
L H
OFF
ON
1S
** AUTO PAN **
POSITION SET
SPEED
PAN LIMIT
ENDLESS
STOP TIME
RET
START
END
••••|••••
L H
OFF
ON
1S
0S
1S
2S
3S
30S
5S
10S
20S
Notes:
• When the panning or tilting operation is controlled manually,
the Auto mode function should be canceled.
To activate Auto mode, select the desired AUTO MODE again
or set a time for SELF RETURN in the SET UP menu to resume
the AUTO MODE after the time set.
• When 0S is selected, the camera stops without dwelling and
starts.
• Auto refreshing may be activated during PATROL PLAY or
AUTO MODE to calibrate the lens position.
■
AUTO PAN KEY Setting
This is to assign one of following auto function to the AUTO key on the
controller. Pressing the AUTO key activates the assigned function
after this setting.
• Move the cursor to AUTO PAN KEY and select an auto function by
moving the joystick to the left or right.
SEQ:
Assigns SEQUENCE function to the key.
SORT:
Assigns SORT function to the key
PATROL:
Assigns PATROL PLAY function to the key.
Note:
AUTO PAN LED on the controller does not light if other than
AUTO PAN is assigned.
*** SET UP MENU ***
PRESET 1*
MAP
HOME POSITION
SELF RETURN
AUTO MODE
AUTO PAN KEY
DIGITAL FLIP
LOCAL/REMOTE
SPECIAL1
CAMERA
RS485 SET UP
15
10MIN
AUTO PAN
SEQ
ON
LOCAL
Setup menu
*** SET UP MENU ***
PRESET 1*
MAP
HOME POSITION
SELF RETURN
AUTO MODE
AUTO PAN KEY
DIGITAL FLIP
LOCAL/REMOTE
SPECIAL1
CAMERA
RS485 SET UP
15
10MIN
AUTO PAN
SEQ
ON
LOCAL
Setup menu
Intelligent Security & Fire
