![background image](http://html.mh-extra.com/html/panasonic/wv-cs650/wv-cs650_operating-instructions-manual_277857028.webp)
- 25 -
Notes:
• When the “|” cursor reaches the “+” end, it jumps back to “–”. At the same time, COARSE is
incremented by one step to enable a continuous adjustment. The reverse takes place when the “|”
cursor reaches the “–” end.
• When the joystick is kept to the right or left for more than one second, the “|” cursor moves quickly.
• To reset COARSE and FINE to the values preset at the factory, press the F2 button of the WV-
CU550A. (For the WV-RM70, press the Left switch and Right switch simultaneously.) COARSE is
preset at the factory to zero-crossing of the AC line phase.
• If the AC line contains noise (spike noise, etc., the stability of the vertical phase of the camera video
output signal may be disturbed.
@
** SYNC **
@ @ @
V PHASE
COARSE 4(1--16)
FINE ......I..
- +
RET
@
** SYNC **
@ @ @
V PHASE
COARSE 1(1--16)
FINE .I.......
- +
RET
8. Move the cursor to FINE by using the joystick. The cursor starts
blinking.
9. Use the joystick to match the vertical phase for both video output
signals as closely as possible.
8. White Balance Setting (WHITE BAL)
(1) Auto-Tracing White Balance Mode (ATW)
1. Display SET UP on the monitor screen.
(Refer to Setup Menu Display on page 10 for details on displaying
the SET UP menu on the monitor screen.)
2. Move the cursor to WHITE BAL and select ATW by using the
joystick. The white balance of the camera is automatically set.
3. For fine adjustment of the ATW, press the CAM (SET) key to
display the ATW fine adjustment menu on the monitor screen.
You can mask the areas in this menu.
4. Move the cursor to MASK SET and press the CAM (SET) key.
Forty-eight mask areas appear on the monitor screen.
Refer to the Light Control Setting section on page 21 for details
about masking areas.
5. After masking areas, press the MON (ESC) key. The previous
settings ATW appear on the monitor screen.
6. Move the cursor to “R.”
Use the joystick to obtain the optimum amount of red gain. The “I”
cursor moves to the left or right.
** SET UP **
CAMERA ID OFF
ALC/MANUAL ALC
SHUTTER OFF
AGC ON
SENS UP OFF
SYNC LL
WHITE BAL ATW
MOTION DET OFF
AF MODE MANUAL
RET SPECIAL
Camera setting menu
** ATW **
R ....I....
−
+
B ....I....
−
+
MASK SET
RET
ATW fine adjustment menu