![background image](http://html.mh-extra.com/html/panasonic/wv-cs650/wv-cs650_operating-instructions-manual_277857022.webp)
- 19 -
5. To set endless turn ON/OFF
Move the cursor to ENDLESS, and move the joystick to the left or
right to set endless turn ON or OFF.
ON:
The camera pans from the start position to the end position,
then keeps rotating in the same direction to return to the start
position.
OFF:
The camera pans from the start position to the end position,
then rotates backward to the start position.
This movement is repeated over and over.
6. To set a dwell time
Move the cursor to DWELL TIME and select a dwell time by
moving the joystick to the left or right. Dwell time changes as
follows:
■
FLIP-A-CHIP Setting
• Move the cursor to FLIP-A-CHIP, and move the joystick to the left
or right to set FLIP-A-CHIP to ON or OFF.
When the joystick is kept pressed down to move the camera to
the bottom end, the camera moves to the bottom end of the range
and stops.
When FLIP-A-CHIP ON is selected, the camera automatically
rotates 180° at the bottom end, and starts moving upward.
Notes:
• If you move the joystick to the centre once and then move it
upward (or downward) after the camera rotated by FLIP-A-
CHIP, the camera moves upward (or downward).
• When you want the camera to move by FLIP-A-CHIP, move
the joystick to the centre once.
• FLIP-A-CHIP does not work when the WV-RM70 or WV-CU254
is connected.
** AUTO PAN **
POSITION SET START
END
SPEED ...I....
L H
ENDLESS ON
DWELL TIME 1S
RET
** AUTO PAN **
POSITION SET START
END
SPEED ...I....
L H
ENDLESS ON
DWELL TIME 1S
RET
*** SET UP MENU ***
PRESET 1*
MAP
HOME POSITION 15
SELF RETURN 10MIN
AUTO MODE AUTO PAN
FLIP-A-CHIP ON
LOCAL/REMOTE LOCAL
CAMERA
Setup menu
0S
1S
2S
3S
30S
5S
10S
20S
Notes:
• When the panning, tilting, lens zoom or focus operation is
controlled manually, the Auto mode function should be
canceled.
To activate Auto mode, select AUTO MODE ON again.
• When 0S is selected, the camera stops without dwelling and
starts.
■
LOCAL/REMOTE Setting
• Move the cursor to LOCAL/REMOTE, and move the joystick to the
left or right.
You can toggle between LOCAL and REMOTE.
Note:
REMOTE does not work when the WV-RM70 or WV-CU254
is connected. Make sure LOCAL is selected in this case.
*** SET UP MENU ***
PRESET 1*
MAP
HOME POSITION 15
SELF RETURN 10MIN
AUTO MODE AUTO PAN
FLIP-A-CHIP ON
LOCAL/REMOTE LOCAL
CAMERA
Setup menu