![background image](http://html.mh-extra.com/html/panasonic/wv-cs650/wv-cs650_operating-instructions-manual_277857035.webp)
- 32 -
1. Remove the mounting screw (M3) from the
camera mounting angle (provided).
2. Mark the mounting holes on the ceiling,
using the removed camera mounting angle
as a template.
Marking
3. Fix the camera mounting angle to the ceiling
with four screws (not provided).
Caution:
The installation should be strong
enough to support 4 times the total
weight.
Note:
Be sure to protect the video and
power cables. Otherwise, the cut edges
will damage the cables.
Diecast Case
3. Assemble the camera
Reverse the disassembly procedure. Take
care not to cut any cables.
Precautions:
1. The following installation work should be
referred to qualified service personnel or
system installers and must conform with
local codes.
2. Be sure to select a ceiling board that is
strong enough to support this camera.
3. To mount the camera on any other kind of
ceiling, use the optional ceiling bracket WV-
Q105, WV-Q106 or WV-Q107.
4. To mount the camera on the wall, use the
optional wall mount bracket WV-Q108.
a. Sideway cable exit
Prepare a cutout in the diecast case and
decoration cover as shown in the following
drawing.
PAL or NTSC
DIP
φ
OFF
NTSC
ON
PAL
Note:
The dip switch
φ
is not for changing NTSC
to PAL or PAL to NTSC. This switch is set at
factory. Do not change the setting of this
switch. The factory setting is ON.
b. Top cable exit