![background image](http://html.mh-extra.com/html/panasonic/wv-cs650/wv-cs650_operating-instructions-manual_277857015.webp)
- 12 -
CU550A.
DELAY TIME
Specifies the time to transmit the acknowledge request when communicating on a two-line connection.
(OFF, 10, 20, 40, 100 ms) The factory setting is OFF.
This menu appears only when a two-line communication is used.
The settings become effective with closing of the SET UP MENU.
Note:
If the conditions of the communication for the camera became effective, the communication between
the camera and the controller may not work. Set the conditions of the communication for the
controller to the same as the camera’s. The communication between the camera and the controller
works correctly.
Setting the dip switch C inside the camera unit to ON resets the conditions of the communication for
the camera to the factory preset settings. (See page 31)
■
Preset
●
Preset Menu Display
1. Displaying the preset menu directly
(1) Move the cursor to PRESET 1 and move the joystick to the left or right to select the position
number to be set.
(2) Press the CAM (SET) key.
The preset menu appears on the monitor screen.
2. Displaying the preset menu from the PRESET NUMBER SET menu
(1) Move the cursor to MAP
and press the CAM (SET) key.
The PRESET NUMBER SET menu appears on the monitor screen.
(2) Move the cursor to the position number to be set and press the CAM (SET) key.
The preset menu appears on the monitor screen. To display position number 33-64, move the
cursor to “33-64” in the lower left of the screen and press the CAM (SET) key.
*** SET UP MENU ***
PRESET 1*
MAP
HOME POSITION 15
SELF RETURN 10MIN
AUTO MODE AUTO PAN
FLIP-A-CHIP ON
LOCAL/REMOTE LOCAL
CAMERA
Setup menu
* PRESET NUMBER SET *
1* 2* 3* 4*
5* 6* 7* 8*
9* 10* 11* 12*
13* 14* 15*H 16
17 18 19 20*
21 22 23 24
25 26 27 28
29 30 31 32
ID:DOOR
33-64 RET
PRESET NUMBER SET menu
* PRESET NUMBER SET *
33 34 35 36
37 38 39 40
41 42 43 44
45 46 47 48
49 50 51 52
53 54 55 56
57 58 59 60
61 62 63 64
ID:
1-32 RET
Notes:
• The * mark means the position number is preset.
• The character H means home position.
• The right side of ID: is the preset ID of the preset number with the cursor.