67
[Access interval]
Select the interval to access the Dynamic DNS Update ser-
vice server to check the IP address and the host name from
the following.
10 min/ 20 min/ 30 min/ 40 min/ 50 min/ 1 h/ 6 h/ 24 h
Default:
1 h
■
Other setup
Click the [Advanced >] button to set bandwidth control,
HTTP port number, and FTP port number.
The setup menu (advanced) will be displayed.
[HTTP port number]
Specify the HTTP port number to be used to send images
from the recorder.
It is unnecessary to change it for normal use.
1 - 65535
Default:
80
Note:
• Depending on the network settings, network communi-
cation may not be established if the HTTP port number
has been changed. In this case, refer to the administra-
tor of each network.
• The following numbers and the FTP port number are
unavailable for the HTTP port number. 20, 21, 23, 25,
42, 53, 67, 68, 69, 79, 105, 110, 123, 161, 162, 546,
547, 995, 10001, 10002, 10003, 10004, 10005, 10006,
10007
[FTP port number]
Designate the FTP port number of the recorder.
It is unnecessary to change it for normal use.
1 - 65535
Default:
21
Note:
• The following numbers and the HTTP port number are
unavailable for the FTP port number.
20, 23, 25, 42, 53, 67, 68, 69, 79, 80, 105, 110, 123,
161, 162, 546, 547, 995, 10001, 10002, 10003, 10004,
10005, 10006, 10007
[Attach the alteration detection code (FTP)]
Determine whether or not to attach the alteration detection
code to the recorded images to be downloaded from an FTP
server.
Off: Does not attach the alteration detection code.
On: Attaches the alteration detection code.
Default:
Off
[Back] button
Click the button after completing the settings.
Summary of Contents for WJ-NV200K
Page 101: ...101 ...
