62
The settings relating to the display of the main monitor, the live monitor connected to the recorder and the monitor of the PC con-
nected via a network are configured on the setup menu - the "Advanced setup" menu - the "Monitor" page.
The settings relating to image switching such as multiscreen display and sequence display of live images are also configured on
this page.
The "Monitor" page has [Main monitor], [Live monitor] and [Advanced setup] tabs.
Set up the main monitor [Main monitor]
Perform settings relating to the main monitor display such as the display position of the camera title.
Configure the settings relating to monitors [Monitor]
■
Camera title
[Display]
Determine whether or not to display the camera title on the
main monitor.
On: Displays the camera title.
Off: Does not display the camera title.
Default:
On
[Position]
Select the position to display the camera title on images.
L-Upper/ L-Lower/ R-Upper/ R-Lower
Default:
R-Upper
[Camera title]
Enter a camera title to display for each camera using the on-
screen keyboard (
☞
page 37)
Set up the live monitor [Live monitor]
Set up the live monitor by selecting the camera images to display, the image display duration, etc.
■
Live sequence
Set the display sequence for camera images (image switch-
ing).
[Duration]
Set the interval (duration) for switching camera images.
5 s/ 10 s/ 15 s/ 30 s
Ext.: Switches Camera 1 to 9 to display images accord-
ing to the signal input triggered by the terminal
alarms from Terminal 1 to 9.
Default:
10 s
Note:
• The terminal status (N.O. or N.C.) for supplying an alarm
signal to the alarm terminal depends on the settings for
"Terminal input" of "Advanced terminal alarm setup" (
☞
page 56).
[Camera selection]
Select the cameras to be included in the sequence display.
Mark the checkbox next to the desired camera. The selected
cameras will be displayed in numerical order.
[Secret view]
Secret view is a function that causes the camera image dis-
played on a 1-screen or the selected camera image on a
multiscreen on the main monitor to be displayed as a black
screen on the live monitor. Determine whether or not to use
secret view.
On: Enables the secret view function.
Off: Disables the secret view function.
Default:
Off
Note:
• While the sequence display is being performed, the
secret view images will be skipped (not displayed).
• The image on the live monitor may momentarily go black
when images are switched on the main monitor.
Summary of Contents for WJ-NV200K
Page 101: ...101 ...
