46
Detect cameras for registration [Detect cameras]
Clicking the [Setup >] button of "Detect cameras" on the [Camera setup] tab will display the following window.
After editing the settings, click the [OK] button to save the settings and return to the [Camera registration] tab.
[New] button
Detects all the connected cameras. The models, results of
the detected cameras and IP addresses will be displayed.
[Addition] button
Detects only the added or replacing cameras. The models,
results of the detected cameras and IP addresses will be
displayed.
[Camera]
Refer to "[Easy Start]" (
☞
page 39) for further information.
[Select]
Mark the checkboxes of cameras to register.
[Model]
Refer to "[Easy Start]" (
☞
page 39) for further information.
[Results]
Refer to "[Easy Start]" (
☞
page 39) for further information.
[IP address]
Displays the IP addresses configured for the detected cam-
eras.
[Auto addressing]
The IP addresses of the cameras whose checkboxes are
marked will be automatically configured.
Note:
• It is impossible to register the cameras in other subnets
via the same router.
• For the security enhancement, camera detection will
become impossible when 20 minutes have passed. That
depends on the camera models. Refer to the operating
instructions of the camera for further information.
• When "On" is selected for the "DHCP" setting of the
detected cameras, the recorder will forcibly change the
setting to "Off" to give the IP addresses automatically.
• Click the [Cancel] button to return to the [Camera regis-
tration] tab without applying the camera detection result.
Summary of Contents for WJ-NV200K
Page 101: ...101 ...
