79
Configure the settings relating to recording/event schedules
[Schedule]
The settings for the recording schedules and event actions are performed on the "Schedule" page by designating a day of the
week and time.
It is possible to create a time table by dividing a day into up to 6 time zones and to create recording schedules by assigning pro-
grams to the created time zones and by setting "On" or "Off" for each event action.
Up to 4 programs can be created for the recorder.
On the [Program] tab, the recording rate and image quality, etc. for each camera channel can be set by creating the programs
according to the resolution.
It is also possible to create special days apart from the normal schedule, and a recording program of another day of the week
can be switched to a special day's program automatically.
The "Schedule" page has [Program] and [Special days] tabs.
Flowchart on how to create a schedule
Follow the procedures below to create schedules.
Create a program
Assign the program to the time table.
Create a program [Program]
Select the [Time table] tab on the "Schedule" page. (
+
Page 60)
When one of the [PROG1] to [PROG4] buttons is selected, the "Program setup" page will be displayed.
The image quality and recording rate for each camera channel can be set on this tab by creating the programs according to the
resolution, maximum recording rate (only for HD716K), and recording mode.
(
+
Page 79)
➜
(
+
Page 81)
(
+
Page 81)
➜
Create a time table.
Summary of Contents for WJ-HD716K
Page 155: ...155 ...
