Panasonic WJ-HD716K Installation Manual Download

Page: 59 / 156

[Maintenance] button

Select this button to display the "Maintenance" page (

page 119).

Check and setup of the hard disk drive information of

the recorder, management of the setup data and check
of log information can be carried out on the
"Maintenance" page. Formatting SD memory cards and
displaying the disk configuration page can also be car-
ried out on the "Maintenance" page.

[Exit] button

Exits the setup menu when finishing the operation of

setup menu. The settings will be applied.

!33

Setup page

Displays each setup page. There are tabs for some

setup pages.

How to operate the setup menu

The settings required to operate the recorder are configured on the setup menu in advance.
The setup menu is displayed on Monitor 2.

Note:

• The setup menu can also be displayed by holding down the [SETUP/ESC] button (for more than 2 seconds) on the front

panel of the recorder.

• At the startup of the setup menu for the first time, "Quick" page will be displayed as the top page of the setup menu.

After operating the recorder on the "Quick" page or each setup page, the "Basic" page (

page 65) will be displayed as the

top page of the setup menu from the next time.

Operation using buttons on the front cover

Step 1

Display the setup menu.

Display the sub menu by pressing the [SUB
MENU] button, move the cursor to "Setup
Menu", and press the [SET] button.

→

The setup menu window opens.

Note:

• While live images are being displayed, hold down the

[SETUP/ESC] button for more than 2 seconds.

Operation using a mouse connected to the recorder

Step 1

Display the setup menu.

Click "S.Menu" on the status bar below the screen, and click
"Setup Menu" on the "Sub Menu" window.

SUB

MENU

➜

Summary of Contents for WJ-HD716K





























































































































































Search results

Summary of Contents for WJ-HD716K

Reviews:

Related manuals for WJ-HD716K

Brands by name

Popular brands

Panasonic WJ-HD716K, Installation Manual

Search results

Summary of Contents for WJ-HD716K

Reviews:

Related manuals for WJ-HD716K

Brands by name

Popular brands