Panasonic WJ-HD716K Installation Manual Download

Page: 18 / 156

Insert an optional SDHC/SD memory card

Step 1

Open the SDHC/SD memory card slot.

Step 2

Insert a SDHC/SD memory card to the slot until it clicks.

Step 3

Close the cover of the SDHC/SD memory card slot.

Note:

• When removing the SDHC/SD memory card from the

slot, push the card until it clicks and pull it up straight.

Insert a DVD disc (commercially available)

Step 1

Open the DVD drive cover.

Step 2

After confirming that the power of the recorder is on, press
the eject button located at the center of the DVD drive and
pull the disc tray gently.

Note:

• After copying the recorded data on a DVD, perform the

procedure to eject the DVD. (

Operating Instructions

(PDF))

Otherwise, the tray may not open even after the eject

button is pressed.

Step 3

Place a disc with the label side up and fit the hole of the disc
to the center (spindle) of the tray. Then, push the tray gently.
Click sound will be heard and the inserted disk will be set.

Pull the tab

down.

SDHC/SD memory

card slot

When inserting a SDHC/SD

memory card, confirm that the

label on the SDHC/SD memory

card is upside and only the

upper right corner of the card

has different shape.

Pull the tab down.

Eject button

Spindle

Summary of Contents for WJ-HD716K





























































































































































Search results

Summary of Contents for WJ-HD716K

Reviews:

Related manuals for WJ-HD716K

Brands by name

Popular brands

Panasonic WJ-HD716K, Installation Manual

Search results

Summary of Contents for WJ-HD716K

Reviews:

Related manuals for WJ-HD716K

Brands by name

Popular brands