Panasonic WJ-HD716K Page 55 Installation Manual Download

Page: 55 / 156

Turn on the power

Turn on the power of the recorder.

Startup

Step 1

Connect the power plug to an electric outlet.

Step 2

Press the power switch at the rear of the recorder to turn on
the power.

→

The operate indicator will light and the system check

(checking the recorder and the hard disk drives) will
start.

The startup screen will be displayed on Monitor 2 during

the system check process.

When the system check is complete, live images from

the camera will be displayed (

Operating Instructions

(PDF)).

Note:

• When the login window is displayed during operation

after startup, enter the user name and password.

Refer to Operating Instructions (PDF) for how to operate.

Important:

• Do not turn off the power during the startup process.
• When using the extension units (WJ-HDE400), turn on

the power of the recorder after turning on the power of
all the extension units.

Turn off the power

Turn off the power of the recorder. To turn off the power of the recorder during recording or playback, proceed as follows.

During recording

Step 1

Select "Off" for "Recording" on the [Recording] tab under the
"Basic" page of the setup menu to stop all recordings.
(

Page 68)

Step 2

Turn off the power of the recorder after confirming that all the
HDD access indicators (A/F (HDD access/failure)) are off.

→

The operate indicator will go off.

Note:

• Start recordings after turning on the power of the server.

Currently recorded images are being played

Step 1

Press this button to stop playback.
(

Operating Instructions (PDF))

Step 2

Turn off the power of the recorder after confirming that all the
HDD access indicators (A/F (HDD access/failure)) are off.

→

The operate indicator will go off.

Important:

• Remove the plug from the outlet if not operating the

recorder for a length of time.

• Turn on the power (approx. once a week), and perform

recording/playback to prevent interferences with func-
tions.

• When using the optional extension units (WJ-HDE400),

turn off the power of all the extension units after turning
off the power of the recorder.

Summary of Contents for WJ-HD716K





























































































































































Search results

Summary of Contents for WJ-HD716K

Reviews:

Related manuals for WJ-HD716K

Brands by name

Popular brands

Panasonic WJ-HD716K, Installation Manual

Search results

Summary of Contents for WJ-HD716K

Reviews:

Related manuals for WJ-HD716K

Brands by name

Popular brands