Panasonic WJ-CU550A, Operating Instructions Manual

Page: 31 / 138

Pin No.
-28-
Control Board
1. Data Port (DATA 1 - 8)
These ports are used to transmit/receive control data to/from the WV-CU550A System
Controller. Eight ports are available on the board. Connect supplied 6-conductor cable
assembly or use data grade cable, suitable for RS-485 (2 shielded, twisted pairs). Cable length
may be extended up to 1,200m (4,000 ft).
Designation Direction
1
2
3
4
5
6 Ground
T (A)
T (B)
R (A)
R (B)
Ground
Controller
→
Switcher
Controller
→
Switcher
Controller
←
Switcher
Controller
←
Switcher
2. Test Port (TEST 1, 2)
These ports are used only for factory test.
CONTROL
DATA 1
DATA 2
DATA 3
DATA 4
DATA 5
DATA 6
DATA 7
DATA 8
TEST 1
TEST 2
q
w
3
This board should be installed in the WJ-SX550A Matrix Switcher even if the WJ-AD550
Extension Unit is used.
Caution
6
1