Panasonic WJ-CU550A, Operating Instructions Manual

Page: 108 / 138

-104-
6. Press the Backward Sequence (BACK SEQ) Switch to
continue a sequence that was previously stopped by
the Stop
(STOP) Switch. The sequence will continue in
the reverse direction from the step that was selected
at the time the Stop Switch was pressed.
T-Seq 01
Monitor 16
BACK
SEQ
7. Press the Increment (INC + 1CAM) Switch to move a
sequence one step forward from the step that was
previously stopped by the Stop
(STOP) Switch.
T-Seq 01 Stop
Monitor 16
INC
+1CAM
8. Press the Decrement (DEC - 1CAM) Switch to move a
sequence one step backward from the step that was
previously stopped by the Stop
(STOP) Switch.
T-Seq 01 Stop
Monitor 16
DEC
-1CAM
9. Press the Forward Sequence (FORWARD SEQ)
Switch, after pressing the Alternate (ALT) Switch, to
start the Tour Sequence from the beginning of the
sequence pattern that was previously stopped by the
Stop
(STOP) Switch.
10. To cancel the Tour Sequence select a camera.
Refer to the Camera Selection on page 98.
SEQ ALT
FORWARD
7-3 Group Sequence
The following functions are available only if a Group
Sequence has been previously established through the Set
Up Menu. As described on page 71, up to 8 Group
Sequences can be set up.
1. As described earlier, the Group Sequence determines
which monitor is to be connected with which camera.
Therefore, selecting a monitor is not required.
2. Select G-seq (A2) Menu on the LCD by pressing the
Cursor Keys.
G-Seq < >
A2
3. Select the desired Group Sequence number by press-
ing the Function Keys (F3/F4) or the Numeric Keys.
2 3
4 5 6
7 8 9
MON CAM
ESC SET
0
1
F 1 F 2 F 3 F 4
G-Seq < >
1
G-Seq < >
4. Press the Function (F1) Key to run the selected Group
Sequence.
G-Seq 01
Monitor 16
F 1 F 2 F 3 F 4
1
G-Seq < >
6