Panasonic WH-MDC06E3E5, Service Manual

Page: 35 / 124

35
11.4.2 Connecting Requirement
š
The equipment’s power supply 1 complies with IEC/EN 61000-3-12 provided that the short-circuit power S
sc
is
greater than or equal to 868.69kW at the interface point between the user’s supply and the public system. It is the
responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network
operator if necessary, that the equipment is connected only to a supply with a short-circuit power S
sc
greater than
or equal to 868.69kW.
š
The equipment’s power supply 1 shall be connected to a suitable supply network, having service current capacity
≥ 100A per phase. Please liaise with supply authority to ensure that the service current capacity at the interface
point is sufficient for the installation of the equipment.
š
The equipment’s power supply 2 complies with IEC/EN 61000-3-12.
š
The equipment’s power supply 2 shall be connected to a suitable supply network, with the following maximum
permissible system impedance Z
max
at the interface for models: 0.236 Ω
Please liaise with supply authority to ensure that the power supply 2 is connected only to a supply of that
impedance or less.
11.4.3 Wired Remote Control Instalation
Attached Accessories
No. Name Qty. Diagram Remark
(1) Remote control 1
(2) Remote control cable 1 Length (15 m)
(3)
Screw
(M4 machine pitched – 30mm)
3
Installing the remote control to an outlet box
(embedded cable)
(4)
Screw
(M4 self tapping – 14mm)
3
Installing the remote control to the wall
(exposed cable)