12
ATTENTION
●
Install the unit on a non-combustible material such as metal.
Installing it on other material could lead to fire.
●
Do not place the unit near flammable materials.
Failure to do so could lead to fire.
●
Do not hold the terminal cover during transportation.
Failure to do so could cause the unit to drop and lead to injuries.
●
Do not allow foreign matter such as metal swarf enter the unit.
Entry of this type of matter could lead to fire.
●
Mount the unit according to the instruction manual in a place where the
weight can be withstood.
Failure to do so could lead to dropping of the unit and to injuries.
●
Do not install or operate an inverter that is damaged or with parts missing.
Failure to do so could lead to injury.
[Install the inverter vertically.]
Installing the inverter in any other way decreases
its heat dissipation effect and results in malfunction.
[Make sure the ambient temperature
stays within the specification.]
The ambient temperature surrounding the
inverter will increase when it is installed near a
heating unit or housed inside a panel. This may
reduce the life of the inverter. If you want to
house the inverter inside a panel, give careful
consideration to the cooling method and panel
size.
●
●
●
●
Tolerable ambient temperature
–10°C to 50°C
Note)
Ambient temperatures should be
measured at a point 5 cm from the
inverter.
●
Space around the inverter
Installation
！
Vertical Horizontal Sideways
[Avoid installing the inverter in
the following locations.]
●
Areas subject to direct sunlight.
●
Areas subject to water or high levels of
humidity.
●
Areas with large amounts of oil mist, dust
or fiber dust.
●
Areas where rain water, water drops or
oil drops may come in contact.
●
Areas where corrosive gases, explosive
gases or flammable gases are present.
●
Installation onto flammable materials
such as wood, or near flammable
materials.
●
Areas subject to vibration.
5cm
or more
5cm
or more
10cm or more
10cm or more
Inverter
