62
PASSWORD (Parameter P65)
A password can be set to prevent unintentional changes to the parameter data after it has
been set.
Data setting range
000 • 1 to 999
("000" indicates that there is no password.)
[Procedures for changing parameter data after setting password]
∗
Example when password is set to "777"
Note)
After the parameter is set, the "function setting mode" cannot be called without
inputting the password. (Write down the password so that you do not forget it.)
Press the (up) and (down) buttons to display the previously set
password. (The main display will flicker.)
The parameter No. will appear when the SET button is pressed.
Press the STOP button to stop the inverter.
STOP
When the MODE button is pressed three times, the password input
display (PS) will appear, and the main display will flicker.
F r
d r
P
0 1
0
0 0
P S
7
7 7
∗
After this step, the data is changed with the normal changing procedures.
MODE
SET
Main display
