30
The VF0 has the following four modes.
(1) Output frequency, current display mode, (2) Frequency setting, monitor
mode, (3) Rotation direction setting mode, (4) Function setting mode
Normally, use in the output frequency, current display mode.
This mode is entered when the power is turned ON.
Function of Each Mode
(1) Output frequency, current display mode
1. Output
frequency
(line speed)
2.
Operation
preparation
completed display
3. 0V stop
display
The output current of the inverter is
displayed.
SET
(2) Frequency setting, monitor mode
The frequency can be digitally set, and the
parameter P09 frequency command can
be monitored
[Data change and monitor]
·
Change the frequency with the
and
buttons, and press the SET
button to set the data.
·
The parameter P09 command
frequency is displayed except
during the digital setting.
[Mode display]
[Output frequency display]
(3) Rotation direction setting mode
The rotation direction can be set
and the control status (local/
external) can be monitored with
panel operations.
[Data change]
·
Change the data with the
and
buttons,
and press the SET button to set
the data.
[Mode display]
Output current display mode
Local –
Forward run
Local –
Reverse run
During external
control, L will
change to E.
(4) Function setting mode
The parameter data can be changed and
monitored in this mode.
The parameter No. is displayed when this mode
is entered.
Set the required No. with the
and
buttons.
A password can be set in this mode.
[Parameter No. display]
[Data change]
The data can be changed with the
and
buttons.
Press the SET button, and set the
changed data. (The next parameter
No. will appear when the SET button
is pressed.)
The current parameter No. will
appear when the MODE button is
pressed.
(The data is not set.)
[Password display]
Note)
When parameter P08 is set to "1" just with
the monitor, the settings cannot be changed.
0.
A
0
S
P
r
d
P
1
0
L
F
r
F
0
0.
0
0
0
5
0
0.
L
r
SET
MODE
SET
SET
MODE
MODE
SET
SET
MODE
MODE
SET
SET
MODE
MODE
