Panasonic UF-E1, Service Manual

Page: 148 / 271

UF-E1
144
1. The CNG signal is monitored over a 4-second silent period following reception of the incoming call. If
the CNG signal is detected, the Fax Reception mode is set. If the CNG signal is not detected, the TAM
OGM is played back to the caller. Subsequently the ICM recording mode is set.
If a busy tone is detected during ICM recording, the line is disconnected.
If a silent period is detected for 6 seconds, the Fax Reception mode is set.
Note that the Remote Control Code is monitored from the time the call is answered until the start of
ICM recording. When the Remote Control Code is detected the unit awaits for the input of command.
This procedure is illustrated in the diagram below.
2. Basic Procedure
Telephone or Fax of the
Remote Station
UF-E1
Call
Monitoring CNG 4 sec.
Max.
30 sec. Monitoring Remote
Control Code
Monitoring CNG and Busy Tone.
If Busy Tone is detected, it
disconnects the line.
If CNG Tone is detected, stop ICM
recording procedure and change to
Fax procedure.
OGM
ICM recording procedure
Fax procedure