Panasonic UF-E1, Service Manual

Page: 110 / 271

UF-E1
106
40 ERR LINE % 5% 10%
(Note 3) Error Line Percentage
Wen the machine detects the error lines
equal to or more than the percentage set,
the machine will disconnect the line.
10%
15%
20%
41 ERR DETECT CNT CNT
(Note 4) Error detection method
CNT: Determined by the Error Line Counter.
%: Determined by the Error Line Percent-
age.
%
42 NOT USED
43 DC LOOP OFF OFF Checking DC Loop
Off : Check DC Loop
On : Not check
ON
44 MONITOR OFF OFF Monitoring the communication protocol
through the speaker
Off : Not selected
On : Protocol will be heard through the
speaker.
ON
45 ITU-T S-FINE OFF/ON ON Select ITU-T S-Fine mode.
48 NOT USED
49 FLASH TIME 80 ms 80 ms
(Note 1) Period of Flash on the line when Flash key
is Pressed.
100 ms
-
2000 ms
50 BREAK RATIO 0% 56%
(Note 1) Dial Pulse Break Ratio The number entered
will be the Break Ratio.
1%
-
98%
52 REDIAL INT 30 sec 180 sec Select interval of auto-redial.
60 sec
120 sec
180 sec
53 REDIAL COUNT 0-15 2
55 BUSY TONE CK OFF OFF Select whether machine detects busy tone
during communication or not.
ON
56 DIAL TONE CK OFF OFF Select whether machine detects dial tone
befor dialing or not.
ON
60 RMT RX TMG 50 ms 50 ms Monitoring duration of DTMF in Remote
Reception Monitoring duration of DTMF
generated by an external telephone in
Remote Reception.
80 ms
110 ms
140 ms
170 ms
200 ms
61 RMT RX DIGIT 2 2 No. of digit for Remote Reception Code
2
: 2 digits
4 : 4 digits
4
62 RMT RX CODE 00-99,
**
, ##
**
Remote Reception Code
Preset Remote Reception Code.
No. Parameter Selection Default
Value
Description