163
UF-7300/7200
UF-8300/8200
5.1.7.
F8 Mode: Service Adjustment
Set the machine to Service Mode, and press the
“8”
key.
↓
Press the
“Start”
key to enter the F8 Service Mode.
↓
Enter the desired code number, or press the
“ ”
,
“ ”
keys.
If you wish to select another code number, press the
“ ”
,
“ ”
keys.
↓
Press the
“Set”
key.
↓
Enter the desired function code number and press the
“Set”
key.
When the
“Clear”
key is pressed, the selected code input will not be accepted.
↓
Press the
“Stop”
key.
↓
Press the
“Function”
and the
“Clear”
keys sequentially to exit the service mode.
↓
Reboot the machine after setting the parameter(s) to activate the setting(s).
F8 Mode
No.
Item
Remarks
00~05 Not Used
06
Error Log View
Each time the arrow key is pressed, the machine errors or
paper jam codes stored in memory are displayed, beginning
with the oldest code.
Note:
Only the 30 most recent codes are displayed.
07
Error Log Clear
Press the Start key.
08~17 Not Used
18
C18 PRT PWM ADJ.PTN.
(LSU PWM Pattern)
Print out the Test Pattern.
Proceed when the LSU is replaced.
19~46 Not Used
47
C47 ADF Scan Test
Place the document on the ADF first.
Press Start key to begin.
48~54 Not Used
Summary of Contents for UF-8300
