Panasonic UF 8200 - Panafax - Multifunction, Service Manual

Page: 221 / 261

221
UF-7300/7200
UF-8300/8200
Where : “set” is used to program the data
“get” is used to retrieve the data
“parameters” represents Internet Parameters
“abbr” represents Auto Dialer
“jnl” represents Journal
“password” is the Remote Password programmed in your machine's User Parameters (i.e.
123456789). Must be enclosed within the parenthesis “( )”.
The command must be enclosed within the hash (#) signs.
9.1.3. Using a PC to Input the Internet Parameters Remotely
This feature provides a convenient and an easy way to input the Internet Parameters right from your PC by
sending a text email message to your machine.The following parameters can be input remotely via a PC.
The other parameters must be entered from the machine in the User Parameters.
• Sender Selection (up to 24 User Names)
• Default Domain
• Selectable Domains (up to 10 additional Domain Names)
• Remote Password
• Manager’s Email Address
• Relay XMT Password
• Relay Domain (up to 10 Domain Names authorized for Relay XMT Request)
• LDAP Server Name (Available for some countries only.)
• LDAP Login Name (Available for some countries only.)
• LDAP Password (Available for some countries only.)
• LDAP Search Base (Available for some countries only.)
• Community Name (up to 2 Community Names)
• Device Name
• Device Location
Your machine interprets the command that you enter in the "Subject" line of your email message and
performs one of the following functions, it Retrieves or Stores data into the Internet Parameters (User
Parameters).The two types of commands that can be entered in the "Subject" line of your email:
(1) To Store data, type : #set parameters(password)# : where the “password” is the Remote
Password programmed in your machine's
User Parameters (i.e. 123456789).You can
enter the Internet Parameters shown above
with this command the first time. However, if
these fields already contain data, do not use
this command as the existing information will
be deleted and overwritten. Use the Retrieve
command below instead.
(2) To Retrieve data, type : #get parameters(password)# : where the “password” is the Remote
Password programmed in your machine's
User Parameters (i.e. 123456789). Make
sure that the CC..., Bcc... lines and the body
of the email message is Blank.
Note:
To activate this feature, change the Fax Parameter No. 158 (PC Remote Update) to “Valid”.