Panasonic UF 8200 - Panafax - Multifunction, Service Manual

Page: 61 / 261

61
UF-7300/7200
UF-8300/8200
3.4. Preventive Maintenance Check List
The chart outlined below is a general guideline for maintenance. The list is for an average usage of 50
transmitted and received documents per day. Needless to say, the environmental conditions and actual use
will vary these factors. The chart below is for reference only.
Note:
1. Wet Cloth represents a soft cloth saturated with water.
For stubborn toner accumulation, wipe with a soft cloth saturated with Isopropyl Alcohol first, then
follow up with a soft cloth saturated with water.
2. The Maintenance Cycle is based on the Counter Information for each individual module.
To verify the counter information, print the Total Counter List using the Service Mode: F7 - Electronic
Counter - 00 (List Print).
3. Cleaning, Replacement and Adjustment Cycle (Sheet) are based on using Panasonic's
recommended standard paper and supplies. These cycles may vary with the kind of paper used,
Paper size, orientation, print duty, continuous/interval print and/or ambient conditions.
No.
Preventive
Maintenance Parts
Ref.
No.
Cleaning Replacement/Adjustment
Ref.
Counter
Cycle
(Sheet)
Method
Cycle
(Sheet)
Procedure
ADF Unit
1 Pick Up Roller 415 10K
Wet soft
cloth
125K
Refer to 2.3.2. F7-08
2 Feed Roller 411 10K
Wet soft
cloth
125K
3 Separation Roller 439 10K
Wet soft
cloth
125K
4 ADF Pad 437 10K
Dry soft
cloth
-
5 White Sheet 526 10K
Dry soft
cloth
-
6 CIS 421 10K
Dry soft
cloth
-
Paper Feed Module
7
Bias Transfer Roller
(BTR)
906 10K
Dry soft
cloth
85K Refer to 2.3.9.
F7-12 8 Pick Up Roller 1106 10K
Wet soft
cloth
125K
Refer to 2.3.8.
9 Feed Roller 914 10K
Wet soft
cloth
-
Fuser Unit
10 Fuser Unit 1334 - - 85K Refer to 2.3.7. F7-02