Panasonic UF-5500, Service Manual

Page: 97 / 365

97
UF-5500 / 4500
065 SILENT
INTEGRATION
TIME 01 = 1 sec.
~
10 = 10 sec. Select ring detection integration time (TAM I/F).
066 RING COUNT
(TAM) 01 = 1 sec.
~
99 = 99 sec. Select ring detection count 1 to 99 times in one step intervals on
TAM I/F mode.
067 Not Used
068 NYSE FAX
FORWARD
(For USA and
Canada only) 1 = Off
2 = On Selects whether the machine will forward the incoming and
outgoing faxes to a specified station.
Note:
Once this parameter is activated, Fax Forwarding via Fax
Parameter 054 is automatically disabled.
069 NYSE LOCAL
PRINT
(For USA and
Canada only) 1 = INC
2 = ON (Always) Selects the printing condition for the incoming faxes after FAX
Forwarding.
INC. : Prints only if FAX Forwarding fails.
ON : Always prints.
070 LINE ERROR 1 = 128 lines
2 = 256 lines
3 = 512 lines
4 = 1024 lines
5 = 2048 lines
6 = Off
(will not disconnect line) 1. Selects the line disconnect condition during reception. If the
number of line errors exceed this setting, the unit will
disconnect the line.
2. Selects the transmit condition of RTP/PIP or RTN/PIN.
(Available if No.73 Error Detect is set to "LINES") (See Note
1)
071 TOTAL ERROR 1 = 5%
2 = 10%
3 = 15%
4 = 20% Selects the transmit condition of RTP/PIP or RTN/PIN.
(Available if No.73 Error Detect is set to "RATE".)
(See Note 2)
072 CONTINUOUS
ERROR 1 = Off (unlimited)
2 = 3 lines/STD
3 = 6 lines/STD
4 = 12 lines/STD Selects the continuous total error criteria of Off/3/6 or 12 lines in
Standard mode. If continuous total error exceeds this setting,
the unit will transmit RTN/PIN.
(Available if No.73 Error Detect is set to "RATE".)
073 ERROR DETECT 1 = Lines
2 = Rate Selects the error detect condition Lines/Rate.
074 RTN RECEIVE 1 = Disconnect
2 = Continue Selects whether to disconnect the phone line or continue when
"RTN" is received.
075 CODING 1 = MH (MH only)
2 = MR (MH or MR)
3 = MMR (MH, MR or MMR) Selects the coding scheme.
076~
079 Not Used
080 DOC. TOP FEED -3.0 mm
~
+3.0 mm Adjusts the distance between the scanning sensor ON position
and the scanning start position.
081 DOC. END FEED -3.0 mm
~
+3.0 mm Adjusts the distance between the scanning sensor OFF position
and the scanning end position.
082~
099 Not Used
100 MAC ADDRESS Indicates the MAC Address.
Note:
Only for UF-5500 .
111~
122 Not Used
124 Limit Redial 1 = Off
2 = On The setting of the redial key is mode effective "on" or invalidity
"off".
125 TOP MARGIN -2.5 mm
~
+2.5 mm Distance adjustment of top margin.
126 LEFT MARGIN -2.5 mm
~
+2.5 mm Distance adjustment of side margin.
Function Parameter Table
No. Parameter Selections Function