Panasonic Toughbook CF-F8EWAZZAM Operating Instructions Manual Download Page 36

Page: 36 / 80

Battery Power

NOTE

Once the battery is fully charged, the wireless display performs recharging only
when the battery level becomes less than approximately 95%, so overcharging is
avoided.

You can check the remaining battery charge using any of the following methods.

Double-tap

on the desktop, double-tap [Power] and tap the [Battery]

tab.

Press the keyboard button or USER button (

page 38) and run Quick Menu

(

page 39).

Battery Indicator

Battery indicator

Battery status

Not lit

The battery pack is not inserted or not being charged.

Pulsing orange

Charging is in progress.

Green

The battery is fully-charged.

Red

The remaining battery is approximately 9% or less.

Blinking red

The battery pack or the charging circuit is not operating
normally.

Blinking orange

The battery cannot be charged temporarily due to the fol-
lowing reason:

Its internal temperature is out of the acceptable range.

Checking the Remaining Battery Charge

CF-08.book 36 ページ２００６年１１月１日　水曜日　午後７時４分

Summary of Contents for Toughbook CF-F8EWAZZAM

















































































Search results

Summary of Contents for Toughbook CF-F8EWAZZAM

Reviews:

Related manuals for Toughbook CF-F8EWAZZAM

Brands by name

Popular brands

Panasonic Toughbook CF-F8EWAZZAM, Operating Instructions Manual

Search results

Summary of Contents for Toughbook CF-F8EWAZZAM

Reviews:

Related manuals for Toughbook CF-F8EWAZZAM

Brands by name

Popular brands