Panasonic Toughbook CF-74JDMBD2M Reference Manual Download

Page: 68 / 87

Setup Utility

Underlined items are the factory presets.

Security Menu

Execute-Disable Bit Capability

• [Enable] indicates that this computer supports hardware-based Data Execution Prevention (DEP).

Disable
Enable

Password on boot

Disable
Enable

SD Startup

• Only when [Password on boot] is set to [Enable] and one or more SD card is registered

Disable
Enable

SD Setting Method

• Only when [SD Startup] is set to [Enable]

Leave Set
Set and Eject

Clear registered SD card

• Only when one or more SD card is registered

Enter the sub-menu.

Set Supervisor Password

Enter the sub-menu.

Setup Utility Prompt

• When [Setup Utility Prompt] is set to [Disable], the message “Press F2 for Setup / F12 for LAN” is

not displayed on [Panasonic] boot screen. However,

and

F12

will work even if the message

is not displayed.

Disable
Enable

Boot First Menu

Disable
Enable

Hard Disk Lock

Disable
Enable

User Password Protection

No Protection
Protected

Set User Password

Enter the sub-menu.

DVD Operation

Disable
Enable

Embedded Security (TPM) Sub-Menu

• Only for model with TPM
• For information on TPM, refer to the

Installation Manual

of “Trusted Platform Module (TPM)”.

Click [start] - [Run] and input [c:\util\drivers\tpm\readme.pdf], and click [OK].

Enter the sub-menu.

Fingerprint Security Sub-Menu

• Only for model with Fingerprint Reader

Enter the sub-menu.

Computrace (R) Sub-Menu

Enter the sub-menu.

Summary of Contents for Toughbook CF-74JDMBD2M
























































































Search results

Summary of Contents for Toughbook CF-74JDMBD2M

Reviews:

Related manuals for Toughbook CF-74JDMBD2M

Brands by name

Popular brands

Panasonic Toughbook CF-74JDMBD2M, Reference Manual

Search results

Summary of Contents for Toughbook CF-74JDMBD2M

Reviews:

Related manuals for Toughbook CF-74JDMBD2M

Brands by name

Popular brands