manualshive.com logo in svg

Panasonic Toughbook CF-74JDMBD2M, Reference Manual

Share
Download
Panasonic Toughbook CF-74JDMBD2M Reference Manual Download Page 76

76

Technical Information

Close the communications software before using the power saving function.

z

If the power saving function (standby or hibernation) is activated while communications software is used, the network con-
nection may be interrupted, or the performance may be adversely affected. In this case, restart the computer.

z

In a network environment, set the [System standby] and [System hibernates] settings to [Never].
Click [start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Power Schemes].

The Windows files included in the retail version of the Windows CD-ROM for OS are contained in the following folders:
c:\windows\docs, c:\windows\dotnetfx, c:\windows\i386, c:\windows\support, c:\windows\valueadd

Network Connections and Communications Software

Using the Windows Associated Files

Summary of Contents for Toughbook CF-74JDMBD2M
























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands