Panasonic Toughbook CF-74JDMBD2M Page 41 Reference Manual Download

Page: 41 / 87

SD Security

To disable the setup card

If you have lost the setup card, disable the card to avoid unauthorized startup or logon.

When using the card to start up the computer

Start the SD Card Setup program. (

page 38

Step

)

The current settings will be displayed.

Remove the check mark from [Use the SD card when starting the computer].

Click [OK], and then follow the on-screen instructions.
All SD Memory Cards currently registered on this computer will no longer be usable to start up the computer.

Even if you add the check mark again for [Use the SD card when starting the computer], the card will not be
usable to start up.

When using the card to log on to Windows

Change the Windows logon password.
The card will no longer be usable to log on to Windows.

Summary of Contents for Toughbook CF-74JDMBD2M
























































































Search results

Summary of Contents for Toughbook CF-74JDMBD2M

Reviews:

Related manuals for Toughbook CF-74JDMBD2M

Brands by name

Popular brands

Panasonic Toughbook CF-74JDMBD2M, Reference Manual

Search results

Summary of Contents for Toughbook CF-74JDMBD2M

Reviews:

Related manuals for Toughbook CF-74JDMBD2M

Brands by name

Popular brands