background image

5

Touchscreen

<Only for model with touchscreen>

You can use the touchscreen function to perform the same operation as the touch pad and mouse. Touch the screen surface 
with the stylus (included).

z

To right-click

A

Click 

 on the notification area.

 changes to 

.

B

Click the object you want to right-click.

 returns to 

.

NOTE

z

You need to make the following setting for each user.

A

Click [start] - [All Programs] - [Fujitsu Touch Panel (USB)] - [Touch Panel Configuration].

B

Select the settings, and then click [OK].

z

Do not add a check mark to [Delete Cursor] since the display may be distorted.

z

The touchscreen function does not work in the Setup Utility, in the full screen of [Command Prompt] or in Recover Pro 
(

Î

page 75

).

1

Run [Touch Screen Calibration Utility].

Click [start] - [All programs] - [Fujitsu Touch Panel (USB)] - [Touch Screen Calibration Utility].

2

Using the stylus, touch each of the 12 “+” target marks one by one until it blinks, and then 
click [Calibration].

3

Click [Save & Exit].

NOTE

z

Perform the touchscreen calibration for each user.

Touchscreen Calibration

Summary of Contents for Toughbook CF-74JDMBD2M
























































































Reviews: