Panasonic TH-75SQ1HW Operating Instructions Manual Download Page 145 | Manualshive

Page: 145 / 146

background image

145

English

Software License

This product incorporates the following software:
(1) the software developed independently by or for Panasonic Corporation,
(2) the software owned by third party and licensed to Panasonic Corporation,
(3) the software licensed under the GNU General Public License, Version 2.0 (GPL V2.0),
(4) the software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL V2.1), and/or
(5) open source software other than the software licensed under the GPL V2.0 and/or LGPL V2.1.
The software categorized as (3) - (5) are distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY,

without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. For details,

see the license conditions displayed by selecting [Software licenses], following the specified operation from the [Setup]

menu of this product.
At least three (3) years from delivery of this product, Panasonic will give to any third party who contacts us at

the contact information provided below, for a charge no more than our cost of physically performing source code

distribution, a complete machine-readable copy of the corresponding source code covered under GPL V2.0, LGPL

V2.1 or the other licenses with the obligation to do so, as well as the respective copyright notice thereof.

Contact Information:
[email protected]

Notice about AVC/VC-1/MPEG-4

This product is licensed under the AVC Patent Portfolio License, VC-1 Patent Portfolio License and MPEG-4 Visual

Patent Portfolio License for the personal use of a consumer or other uses in which it does not receive remuneration

to (i) encode video in compliance with the AVC Standard, VC-1 Standard and MPEG-4 Visual Standard (“AVC/

VC-1/MPEG-4 Video”) and/or (ii) decode AVC/VC-1/MPEG-4 Video that was encoded by a consumer engaged in

a personal activity and/or was obtained from a video provider licensed to provide AVC/VC-1/MPEG-4 Video. No

license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA,

LLC. See http://www.mpegla.com.

«
...
143
144
145
146
»

Summary of Contents for TH-75SQ1HW



















































































































































Reviews:

No comments

Related manuals for TH-75SQ1HW

Brand: Panasonic Pages: 3

Brand: Panasonic Pages: 36

Brand: Panasonic Pages: 23

Brand: Panasonic Pages: 26

PT51HX41E - 51" PROJECTION TV

Brand: Panasonic Pages: 61

Brand: Panasonic Pages: 4

Brand: Panasonic Pages: 52

CYVM5800U - 5.8" CLR MONITOR/DVD

Brand: Panasonic Pages: 3

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 127

CFVDW07M - COMPUTER WIRELESS DISPLAY

Brand: Panasonic Pages: 30

Brand: Panasonic Pages: 4

Brand: Panasonic Pages: 56

Brand: Panasonic Pages: 136

Brand: Panasonic Pages: 12

Brand: Panasonic Pages: 68

Brand: Tanaka Pages: 21

Brand: Edge10 Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands