Panasonic TH-75SQ1HW Operating Instructions Manual Download Page 124

Page: 124 / 146

124

English

Using HDMI-CEC

function

The HDMI-CEC function enables the remote control

of this unit alone to operate the basics of HDMI-CEC

compatible devices by the interlocking control between

this unit and such devices. Also, this function enables

the remote control (or main unit’s buttons) of a HDMI-

CEC compatible device alone to turn on/off this unit and

switch input.

Connection

Connect the HDMI-CEC compatible device to the HDMI

1, HDMI 2 or SLOT terminal.

HDMI cable (commercially available)
DVD Recorder / DVD Player, Blu-ray Recorder /

Blu-ray Player

Setting

Make the setting on the connected device (HDMI-

CEC compatible device) so this function can

operate.
Set [HDMI-CEC settings] - [HDMI-CEC control] to

[Enable]. (see page 68)
Turn on all the devices, and turn this unit off and on.

Then check if images can be seen correctly with

HDMI1, HDMI2 or SLOT input.

Interlocking devices

Performs the following interlocking operations by setting

each item of [Link function] for [HDMI-CEC settings].

■

[

Display → Device

] interlocking

•

When set to [Power off] or [Power off / on]:

Turning this unit off turns off all the connected

HDMI-CEC compatible devices.

•

When set to [Power off / on]:

Turning this unit on turns on the HDMI-CEC

compatible device connected to [HDMI1], [HDMI2]

or [SLOT] when the input is [HDMI1], [HDMI2] or

[SLOT].

•

Switching the input of this unit to HDMI1, HDMI2

or SLOT turns on the connected HDMI-CEC

compatible device.

Note

●

When multiple devices are connected with the

[HDMI1], [HDMI2] or [SLOT] input and this unit is

turned on with the [Power off / on] setting, the device

that was viewed or listened last is turned on.

●

When this unit is turned on with the [Power off / on]

setting and the device that was viewed or listened

last with the [HDMI1], [HDMI2] or [SLOT] input is not

connected, a device displayed for [HDMI1], [HDMI2]

or [SLOT] of [HDMI-CEC settings] is turned on.

■

[

Device → Display

] interlocking

When set to [Power on] or [Power off / on]:

•

Turning on the HDMI-CEC compatible device turns

this unit on, and switches the input to HDMI1,

HDMI2 or SLOT to which the device is connected.

•

Starting to play back on the HDMI-CEC compatible

device turns this unit on, and switches the input

to HDMI1, HDMI2 or SLOT to which the device is

connected.

•

Starting to play back on the HDMI-CEC compatible

device switches the input of this unit to HDMI1,

HDMI2 or SLOT to which the device is connected.

When set to [Power off / on]:

•

Turning off the HDMI-CEC compatible device of

input (HDMI1 / HDMI2 / SLOT) with which you are

currently viewing or listening turns off this unit.

Note

●

The device interlocking function, which turns off this

unit, realizes the interlocking operations by monitoring

signal statuses of devices.
Depending on the setting, the device continues to

output signals even in the power-off state. In this

case, the interlocking function does not operate.
In this case, refer to the manuals of the devices.

●

Input will not be switched when [Setup] - [Input lock]

is set.

●

Depending on the display status or video equipment

status, such as during start-up, the interlocking

operation may not be performed.

●

When the function board is inserted to SLOT and

[DVI-D/SLOT select] is set to [DVI-D], the input is not

switched to SLOT input.

Summary of Contents for TH-75SQ1HW



















































































































































Search results

Summary of Contents for TH-75SQ1HW

Reviews:

Related manuals for TH-75SQ1HW

Brands by name

Popular brands

Panasonic TH-75SQ1HW, Operating Instructions Manual

Search results

Summary of Contents for TH-75SQ1HW

Reviews:

Related manuals for TH-75SQ1HW

Brands by name

Popular brands