83
English
■
To use shortcut (numeric buttons)
1
Press <FUNCTION
> or <1> ‒ <6>.
[Function button guide] will be displayed.
[Function button guide]: When [Off] is set, pressing
the numeric button starts operation.
Example: Input
1
2
3
4
5
6
Input
HDMI1
DisplayPort
DIGITAL LINK
DVI-D
USB/Internal Memory
MEMORY VIEWER
2
Press <FUNCTION> to switch function
group.
Example: Memory load
1
2
3
4
5
6
MEMORY1
MEMORY2
MEMORY3
MEMORY4
MEMORY5
MEMORY6
Memory load
3
Press <1> ‒ <6>.
The function for the pressed button starts to operate.
Example: When <2> is pressed.
Memory load
Load from “MEMORY2”
Ok
Cancel
OSD settings
Makes various settings for the on-screen menus.
■
[Menu position]
Sets the display position of the on-screen menu.
Each time or is pressed, the display position of the
on-screen menu changes.
Display example:
Left
Centre
■
[Menu display duration]
Sets the display duration time for the on-screen menu.
[5 sec] to [180 sec]
■
[Onscreen display]
Set to display / hide the following Onscreen display.
●
Power on display
●
Input signal switch display
●
No signal display
●
No external media display (at USB input)
●
MUTE display after displaying the menu screen
●
Off timer remaining time display when 3 minutes
remaining
●
Display when responding to commands from external
control
[On]:
Displays the Onscreen display.
[Off]:
Hides the Onscreen display.
■
[OSD transparency]
Sets the transparency rate of the on-screen display
background.
0 to 100
■
[OSD memory]
Sets whether or not to hold the cursor position on the
menu screen.
[Off]:
The cursor position is not held.
[On]:
The cursor position is held.
Note
●
Even if it is set to [On], if the power of the main unit is
turned off, the cursor position is not held.
