99
English
■
Network status page
Displays the current configuration information of the
network.
Click [Status
] → [
Network Status].
Displays the configuration details of wired LAN.
■
Input information page
Displays the input information of this unit.
Click [Status
] → [
Input status].
Displays the information of the input terminal.
Displays the information of the input signal.
Note
●
If an input is other than USB (Internal Memory) input
or MEMORY VIEWER input, the name of the input
signal is displayed.
●
In the case of USB (Internal Memory) input and
MEMORY VIEWER input, the name of the file being
played is displayed.
●
[----] is displayed in standby mode.
■
Basic control page
The basic operations of the unit can be performed.
Click [Display control
] → [
Basic control].
Power On/Off control
Use these to select the input signals
AUDIO mute
Switches aspect mode
■
Detail control page
The detailed functions of the unit can be performed.
Click [Display control
] → [
Advanced control].
Enter a command. Use the same command used for
the serial control.
Response from the unit is displayed.
Command is sent and run.
Note
●
After the settings are changed, it may take a while till
the display status is displayed.
■
Detailed set up
When connecting by logging in with administer
privileges, you can make detailed settings for network
related to display.
■
LAN settings page
1
Click [Detailed set up] in the menu.
2
Click [Next].
The settings window appears, showing the current
settings.
•
To change the LAN settings, click [Change].
•
To return to the previous window, click [Back].
