Panasonic TH-75SQ1HW Operating Instructions Manual Download Page 130

Page: 130 / 146

130

English

Select [Execute] with

and press

<ENTER>.

SQ1H-001

SQ1H-002

SQ1H-004

SQ1H-005

SQ1H-014

SQ1H-006

SQ1H-041

SQ1H-009

192.168. 0. 1

192.168. 0. 2

192.168. 0. 4

192.168. 0. 25

192.168. 0. 31

192.168. 0. 7

192.168. 0.124

LAN data cloning

Status

Execute

Display name

IP address

Select display

Off

Write protect

Note

●

Data cannot be copied to the display for which

[Write protect] is set to [On]. Set this to [On] to

prevent [LAN data cloning] from being performed

mistakenly when data copy is not necessary.

●

Once [LAN data cloning] is performed, [Write

protect] is set to [On].

A confirmation window appears.
Select [Execute] with and press

<ENTER>.

All data for the selected displays will be changed.

Are you sure you want to execute?

Execute

Return

LAN data cloning

Data copy to the display starts.

LAN data cloning

Cloning in progress, please wait.

DO NOT unplug your Display!

The exit screen appears.

The blue mark on the list shows the data has been

copied successfully. The red mark shows failure.

If the red mark appears, check the LAN cable

connection or power status of the display of the copy

destination.

SQ1H-001

SQ1H-002

SQ1H-004

SQ1H-005

SQ1H-014

SQ1H-006

SQ1H-041

SQ1H-009

192.168. 0. 1

192.168. 0. 2

192.168. 0. 4

192.168. 0. 25

192.168. 0. 31

192.168. 0. 7

192.168. 0.124

192.168. 0.211

LAN data cloning

Status

Cloning finished.

Display name

IP address

If the data copy has finished, the message appears

on the display of the copy destination.

Cloning finished. Please turn off the power.

Press the power button on the remote

control to turn the power off, and

then turn the power on. Or remove

the power plug from the outlet once,

wait for 30 seconds or more, and then

insert the power plug.

The copied content is applied to the display.

Changing the cloning password

Changes the cloning password required

to use the cloning function.

Display [Setup] menu pressing

<SETUP>.

Select [Options] with

and press

<ENTER>.

The following display appears.

Display information

Options

Software licenses

Cloning password

USB data cloning

Security password

LAN data cloning

Output log data

Shipping

Select [Cloning password] with

and press <ENTER>.

[Cloning password] screen is displayed.

Enter the current password, and press

[Ok].

Enter the new password, and press

[Ok].

Enter the new password again for

confirmation, and press [Ok].

Note

●

The initial password in the factory default state is

[AAAA].

●

Change the password periodically, and set one which

is difficult to guess.

●

For initialization method for the cloning password,

consult the dealer where you purchased the product.

Summary of Contents for TH-75SQ1HW



















































































































































Search results

Summary of Contents for TH-75SQ1HW

Reviews:

Related manuals for TH-75SQ1HW

Brands by name

Popular brands

Panasonic TH-75SQ1HW, Operating Instructions Manual

Search results

Summary of Contents for TH-75SQ1HW

Reviews:

Related manuals for TH-75SQ1HW

Brands by name

Popular brands