Panasonic TH-43EQ2W Operating Instructions Manual Download Page 60

Page: 60 / 178

English

To turn the power off after Screensaver

Select [Standby after SCR saver] in [Mode].
Set [Screensaver duration].

●

Press once to change the time by 1 minute.

Keep pressing down to change the time by 15

minutes.

Select [Start] and press <ENTER>.

●

Screensaver will be activated and the power will

be turned off (standby) at the time set.

Screensaver

Start

10:00

Mode

Standby after SCR saver

Screensaver duration

0:00

SATURDAY

2022/01/01

Note

●

[Screensaver duration] can be set from 0:00 to

23:59.
When this is set to [0:00], [Standby after SCR

saver] will not be activated.

■

[Wobbling]

Automatically shifts the display image to prevent image

retention on the liquid crystal panel.
Setting this to [On] moves the screen position at certain

intervals and displays the images.

Note

●

When [Multi display settings] - [Multi screen display]

is set to [On], [Wobbling] will not be activated. (see

page 68)

●

When [Portrait settings] - [Portrait display] is set to

[On], [Wobbling] will not be activated. (see page 69)

●

When this function is operating, part of the screen

may appear to be missing.

Input label

This function can change the label of the Input signal to

be displayed.
[Input label] - submenu screen

Input label

HDMI3

USB-C

HDMI1

HDMI2

SLOT

PC[YP

]

PC[YP

]

[HDMI1]

[HDMI1] / [Blu-ray] / [CATV]

/ [STB] / [PressIT] / [HDVC] /

[User]

[HDMI2]

[HDMI2] / [Blu-ray] / [CATV]

/ [STB] / [PressIT] / [HDVC] /

[User]

[HDMI3]

[HDMI3] / [Blu-ray] / [CATV]

/ [STB] / [PressIT] / [HDVC] /

[User]

[USB-C]

[USB-C] / [Blu-ray] / [CATV]

/ [STB] / [PressIT] / [HDVC] /

[User]

[SLOT]

[SLOT] / [PressIT] / [User]

[PC]

[PC] / [Blu-ray] / [CATV] / [STB] /

[PressIT] / [HDVC] / [User]

[PC[YP

]]

[PC[YP

]] / [Blu-ray] / [CATV]

/ [STB] / [PressIT] / [HDVC] /

[User]

Labels to be displayed can be set by selecting [User].

[User] setting

   Press     to select the input.
Press     to select [User] and press <ENTER>.
   Press         to enter the label of the input

signal to be displayed.

•

Entering characters (see page 165).

Summary of Contents for TH-43EQ2W



















































































































































































Search results

Summary of Contents for TH-43EQ2W

Reviews:

Related manuals for TH-43EQ2W

Brands by name

Popular brands

Panasonic TH-43EQ2W, Operating Instructions Manual

Search results

Summary of Contents for TH-43EQ2W

Reviews:

Related manuals for TH-43EQ2W

Brands by name

Popular brands