password, and then perform authentication again with the new password to log in to the Web user
interface.
•
The default ID for the Administrator account is "admin", and the default password is "adminpass".
The ID cannot be changed from the Web user interface, but it can be changed through
configuration file programming.
3.
The Web user interface window is displayed. Configure the settings for the unit as desired.
4.
You can log out from the Web user interface at any time by clicking
[Web Port Close]
.
*1
IPv6 only
Controls on the Window
The Web user interface window contains various controls for navigating and configuring settings. The
following figure shows the controls that are displayed on the
[Basic Network Settings]
screen as an
example:
Note
•
Actual default values may vary depending on your phone system dealer/service provider.
•
When you log in to the Web user interface with the User account, the languages of messages
displayed on the configuration screen may differ depending on the country/area of use.
Tabs
Tabs are the top categories for classifying settings. When you click a tab, the corresponding menu items
and the configuration screen of the first menu item appear. There are 6 tabs for the Administrator
account and 3 tabs for the User account. For details about the account types, see
in this section.
1.1.6 Web User Interface Programming
Document Version: 2017-07
Administrator Guide
21
