Note
The "Embedded Web" settings can also be configured with the following procedure.
When the unit is in standby mode,
1.
Tap
/
→ "System Settings"
2.
Tap
/
→ "Network Settings"
3.
Tap
/
→ "Embedded Web"
Configuring Settings from the Web User Interface
To close the unit’s Web port
1.
In the Web user interface, click
[Web Port Close]
.
2.
Click
OK
.
Note
•
The Web port of the unit will be closed automatically in the following conditions:
–
3 consecutive unsuccessful login attempts occur.
•
The Web port can be set to stay open continuously, through Configuration file programming (→ see
"
HTTPD_PORTOPEN_AUTO
). However, please recognize the
possibility of unauthorized access to the unit by doing so.
Access Levels (IDs and Passwords)
2 accounts with different access privileges are provided for accessing the Web user interface: User and
Administrator. Each account has its own ID and password, which are required to log in to the Web user
interface.
Account
Target User
ID
(default)
Password
(default)
Password Restrictions
User
End users
user
-blank-
(NULL)
•
When logged in as User, you can
change the password for the
User account (→ see
).
•
The password can consist of 6 to
64 ASCII characters (case-
sensitive) (→ see
).
Administrator
Network
administrators,
etc.
admin
adminpass
•
When logged in as Administrator,
you can change the password for
both the User and Administrator
accounts (→ see
).
•
The password can consist of 6 to
64 ASCII characters (case-
sensitive) (→ see
).
1.1.6 Web User Interface Programming
Document Version: 2017-07
Administrator Guide
19
