![background image](http://html1.mh-extra.com/html/panasonic/sp22p/sp22p_operating-instructions-manual_3934201047.webp)
Page 37
22
SP
193C-E-PMA01-A04-01
PrintCondition
8-5
PrintCounter
1. PasteCount
SetCnt (for preset)
2. SupplySolder
CheckSolderOut
SupplyTime
Above contents are as follows.
1. PasteCount
It decreases one by one whenever one board is printed during automatic operation. When it is “0”,
automatic operation stops (Automatic operation - Remaining solder check) or solder is supplied
automatically (set in FuncSwitch window). Set the counting number in SetCnt field.
2. SupplySolder
CheckSolderOut
Remaining solder is checked in the chosen check method, Sensor or Counter and solder is
supplied.
• After no solder is checked by the remaining
solder check during F
→
R printing, solder is
supplied automatically (set in FuncSwitch
window)
∗
When automatic solder supply is OFF, “Sensor”
is invalid.
• PasteCount decreases one by one whenever
one board is printed during automatic opera-
tion. When it is “0”, automatic operation stops
or solder is supplied automatically (set in
FuncSwitch window).
∗
When automatic solder supply is OFF, be sure
to choose “Counter.”
SupplyTime
Set the solder discharging time at automatic solder supply.
Sensor
Counter
R
F
Solder supply position
Printing head unit
Operator’s side
Summary of Contents for SP22P
Page 2: ......
Page 6: ...6 MEMO 193C E PMC00 B02 00...
Page 10: ...MEMO Page 4 193C E PMA00 B03 00...
Page 14: ...Page 4 193C E PMA01 A01 01 MEMO...